Prevent the conveyor belt from starting under load.
If the conveyor belt deviates, measures should be taken to correct it in time.
Conveyor belts of different types and specifications are not suitable to be connected together, and the joints should preferably be vulcanized.
Select the right type, structure, specification and number of layers of the conveyor belt reasonably according to the conditions of use.
The belt speed should not be greater than 2.5m per second. For materials with large lumps and abrasion, low speed should be used as much as possible.
Choose the right driving roller and reversing roller according to the design requirements of the conveyor.
The feeding direction should follow the running direction of the conveyor belt. In order to reduce the impact of the material on the conveyor belt when the material falls, a chute should be used to reduce the material drop distance.
Avoid the conveyor belt from being blocked by the frame, pillar or block material, and prevent it from breaking and tearing. When the conveyor belt is found to be partially damaged, repair it in time to avoid expansion.
