Due to the long-term use of the belt conveyor in the production process, the conveyor belt will be stretched and some equipment failures will be caused. Therefore, please checked and adjusted before useing to ensure the safe operation of the conveyor equipment. The tension of the conveyor belt is generated by the tensioning device. When conveying inclined upwards, the belt’s own weight also generates initial tension.

In order to operate reliably, it is necessary to check before the operation to ensure that the belt tension is within a certain range. Pay attention to the following points when adjusting:

(1) For the first use, adjust the conveyor belt to proper strength, and the belt between two sets of adjacent rollers should not sag too much, so that the material will not roll off the belt conveyor after falling onto the conveyor belt.

(2) When adjusting the conveyor belt, consider the operation of the equipment after stretching. Avoid deviation of the conveyor belt. A deviation detection device can be installed, and an early warning will be given in case of deviation.

(3) Choose suitable conveyor belt.

(4) Adjust the position of the roller. Pay attention to the following points:

One Response

Leave a Reply

Your email address will not be published. Required fields are marked *

6 − 6 =